Motorcycle Tourer
 
 Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login
  


Best Sellers

Cardo Scala Rider G4 Powerset

Cardo Scala Rider G4 Powerset

£375.89

Bike to Bike up to 1 mile - 1.6km with FM & MP3 Full A2DP stereo. However most people find the range about half a ...
find out more

Trailer Plug and Socket Upgrade Set

Trailer Plug and Socket Upgrade Set

£17.99

Everything you need to upgrade an existing 7 pin plug / socket combination. The kit consists of:- 1 x Trailer Plug 1 x ...
find out more

Cardo Scala Rider G4

Cardo Scala Rider G4

£203.35

The SCALA RIDER G4 Single - Specification as per the multi set - but a single headset. UK Power adaptor included - but also ...
find out more

Schuberth Rider Communication System C3

Schuberth Rider Communication System C3

£299.00

Schuberth Rider Communication System for C3 helmets Fully integrated communication set for Schuberth C3 helmets The new SRC-System™ is a communication ...
find out more

Cardo Scala G4 Corded Microphone Option

Cardo Scala G4 Corded Microphone Option

£44.75

This is a replacement base for your G4 which has the microphone on a small wire rather than a rigid boom. Existing G4 customers ...
find out more

Vango Omega 350 - 2010

Vango Omega 350 - 2010

£145.00

This is a great tent for motorcycling with. Compact, lightweight with a LARGE porch area. Although you can't quite stand up in the tent ...
find out more

 

Paint Protection Film by VentureShield™

Touring Store |  Paint Protection Film by VentureShield™

Bike Kits by ManufacturerBike Kits by Manufacturer

CLICK THE IMAGE OPPOSITE - for VentureShield™ Paint Protection Kits for your make of motorcycle

Worldwide Delivery

Helmet Paint Protection System (HPPS) kits by ManufacturerHelmet Paint Protection System (HPPS) kits by Manufacturer

CLICK THE IMAGE OPPOSITE - for VentureShield™ Paint Protection Kits for your helmet

Worldwide Delivery


Click Here for Frequently Asked Questions

Top Performance Paint Protection Film. The Ultimate Way to Protect Your Bikes Paintwork !!

VentureShield™ is an extremely abrasive resistant film that will withstand the impact from years of stone chipping and weathering, and is guaranteed to remain optically clear year after year. The patented acrylic adhesive will withstand lubricants, oils, UV rays and mould growth. It's ability to resist yellowing, and offer the highest level of abrasion resistance is unparalleled in the industry.

Perfect for use on tanks where tankbags are used, front fairings to protect from stone chips and side panels to protect from boot marks and wearing paint away.

It's like like leaving the showroom everyday...



Installation steps for appling the VentureShield™ film patterns.

Before installing the Ventureshield patterns please consult the more detailed written instructions included with the paint protection patterns for bikes.


Work in a dust free environment, with no wind and out of direct sunlight.

Make sure the painted surface to be covered is both clean and dry.

Pre-mix the soap solution ahead of time.

Remember VentureShield™ is elastic and a very forgiving material - you can lift it and reposition it as needed, there is no reason to rush the installation.

All kits come with free squeegee and a detailed guide to help you install your protection film with ease.

Protect your Motorcycle Paintwork with VentureShield™
1. The first step is to spray the surface where the film is to be applied with a soapy solution using a sutable mist spray container1
2. Next, remove the white backing from the film and spray the exposed adhesive with the soap solution.2
3. The film should then be positioned on the vehicle and another coating of soapy solution should be sprayed onto the top surface of the film.3
4. The next step is to pick a starting position, peel that corner up and then spray a plain water solution under the film.4
5. Now squeegee the film down at that start point to tack the pattern down in place.5
6. Now spray the outside of the film with the soapy solution again, and start to squeegee from the start position outwards towards the edges, stretching the film with the palm of the hand as necessary to fit the part to the bike.6
7. The final step is to seal and dry the edges using your squeegee and a dry towel.

That's it finished. Your paint protection film is in place protecting your bike.
7
Lifetime Guarantee

VentureShield™ Paint Protection film is guaranteed againt yellowing, cracking, bubbling and peeling, providing fitment is carried out to manufacturer's specification.

Guarantee

Touring Store |  Paint Protection Film by VentureShield™

 
© Copyright 2007 - 2010 Mono-Trail Limited. Company No. 06525682 - Privacy Policy - Disclaimer